WangYe WY50QT-86 Manuel d'utilisateur télécharger pdf (Page 6)

- 6 -

Ignition switch（Diagram 5）

⑴ON( )—When the key is turnned to this position，you can start the

engine，and now，the key cann’t be pulled out.

⑵OFF( )—When the switch is trunned to this position,the engine

will close，pull the key out.

⑶Lock( )—When the key is turnned to（）， pull it out，and now，

cann’t do the turnning operation,the engine and all lights don’t work.

Lock cover switch（Diagram 6）

（1）Lock cover controling handle：Pull the handle up,the lock cover is

closed.

（2）SHUT：Turn the key in the direction of SHUT,the lock cover is

closed

（3）Lock cover：When the lock cover is closed,the key cann’t be put into

the hole for improving the ability of security.

（4） OPEN: Turn the key in the direction of OPEN,the lock cover is open.

Diagram 6

Diagram 5

- 7 -

Light switch 1（Diagram 7）

Three marked positions，“ ” ,“ ”and“•”

：When it is here,the front light,position light,rear light and meter light

work.

：When it is here,the position light,rear light and meter light work.

•： When it is here,the front light,rear light,position light and meter light

don’t work.

Starting switch 2（Diagram 7）

When you pull it in，the engine is started。（ Consult P14）

The front light changing switch 1（Diagram 8）

Press“ ”， hight beam；press“ ”， low beam.

Turnning signal light switch 2（Diagram 8）

When the switch is on“ ”， shows turnning left，and it is on“ ”， shows

turnning right，and now the right turning light and signal light work. When the

button is on “ ”,the signal light doesn’t work.

Diagram 7

Diagram 8

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Pas de commentaire

WangYe WY50QT-86 Manuel d'utilisateur Page 6