WangYe WY50QT-86 Manuel d'utilisateur télécharger pdf (Page 15)

- 24 -

Air filter cleaning（Diagram 22）

• Take out air cleaner cover

• Screw up the blot.

• Take apart the core from air cleaner box.

• Compress air or use dry brush clean the filter element or

put a new filter in the air clean box.

• Do the above opposite to reinstall the air filter.

Warning：

• Do not use gasoline or low burning point solvent to clean

The battery maintenance（diagram 23）

It is adopted the airtight battery (don’t add water)

Attention：Never take apart upper cover of the battery.

l If the motorcycle don’t use for a long time. Must take off the battery and put it into a place

where it is a dry and air.

l If the head of battery is corroded. Please take it off and clean.(use boil water)

Remarks：Before removing the battery,close the ignition switch and then remove○

，when

installing,first○

,and then○

。

Diagram 22

Diagram 23

- 25 -

Adjustment idle speed（diagram 24、diagram 25）

The carburetor has adjusted to the best situation before selling out.

If it is not well adjusted, ask professional to adjust it as the following

instruction.

• Warm up several minutes after engine starting.

• Screw the bolt 1 in slightly to increase the idle speed，then

screw in the mix ratio bole first and next out from the idle

speed adjustment screw to gain the minimum torque.

• After adjusting the idle speed, adjust the throttle free path to

2-4mm.

• After well adjusted, the engine speed can transit steadily when

suddenly apply the throttle instead of turning off.

Diagram 24

Diagram 25

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

WangYe WY50QT-86 Manuel d'utilisateur Page 15